mitsubishi EE4 CT25M5BT Repair Tips
Search: EE4 CT25M5BT mitsubishi
Results 2
Results 2
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Mitsubishi | EE4 CT25M5BT | Dead - blows chopper tr s/c | mod, i.e. change the 220R res on print side of CRT base to 1K2 1/2watt,this apparantly prevents a surge from blowing the chopper at switch off | ||
Mitsubishi | EE4 CT25M5BT | Chopper Tr blows aft few days | Replace Q901 (chopper), R901 (4R7 10W), D909 (3V Zener) and change 220R resistor on the print side of the CRT PCB to 1K2 1/2 watt. |